4 PLP INSTALLATION. 5 Select Mounting Location. 5 Mount the PLP. 6 ATTACH PSB TO THE DISPLAY. 7 INSTALL THE DISPLAY. 7 REMOVE THE DISPLAY.Installation Instructions PLP INSTALLATION Perform the following procedures to mount the PLP. Select Mounting Location To select the mounting location, do the following: WARNING: It is the responsibility of the installer to verify that the wall to which the mount is anchored will safely support the combined load of all attached components and equipment.Installation Instructions PLP INSTALLATION (Cont’d) Mount the PLP To mount the PLP, do the following: 1.
Holding the PLP against the wall, select the pair of mounting holes that best suits your situation (see Figures 5, 6, and 7). NOTE: The mounting holes are slotted to allow for a small degree of lateral movement.Installation Instructions ATTACH PSB TO THE DISPLAY To attach the PSB to the display, do the following: To help your identify the correct PSB that matches the model number of your display, refer to the cross- reference chart at www.chiefmfg.com. To download the corresponding PSB installation instructions, refer to www.chiefmfg.com.Installation Instructions TILT ADJUSTMENT ° ° To tilt the display 0 to 15 down, do the following: ° 1. Manually tilt the display 0 to 15 desired position.
If desired, tighten the nut (see Figure 10) to increase the amount of tension needed to hold the mount in the position set in Step 1.
Shop Chief RLF2 32 Inch to 52 Inch Universal Fixed Mount. Search all Chief Mounts in TV Flat Panel Wall Mounts. The Chief Manufacturing RLF2 fixed wall mount features a unique hinged design and low-profile depth. Chief Manufacturing RLF2 Features: Hinged design reduces packaging material; Wide open wall plate allows for easy cable routing and connection.